IQON CL10 – Heat-Moldable Carbon Boot for Freeskate, Downhill & Urban Skating
The IQON CL10 is a high-performance carbon boot designed for skaters who demand precision, responsiveness and a direct connection to their skates.
Its construction combines a Kevlar-reinforced carbon composite shell with a carbon cuff, creating a rigid, lightweight platform specifically suited to freeskate, urban skating and freestyle.
The heat-moldable construction allows the boot to be adapted to the shape of the foot, providing a more precise and personalized fit.
A premium boot for demanding skaters looking to move beyond conventional plastic shells and experience the direct response of a carbon setup.
Carbon + Kevlar Construction
The CL10 uses a carbon fiber and Kevlar hybrid construction in both the shell and cuff.
This combination provides a rigid and durable structure that responds quickly to the skater's movements.
The stiffness of the boot promotes direct power transfer, particularly noticeable during acceleration, strong edge pressure, direction changes and technical maneuvers.
For urban freeskating, this translates into increased control and precision.
It can also be an excellent foundation for a dedicated downhill setup, where boot stiffness and precise control are essential.
Heat-Moldable Shell – 110°C
One of the major advantages of the IQON CL10 is its heat-moldable carbon shell.
The shell can be heated to 110°C to adapt its shape to the skater's foot.
This allows for a much more personalized fit, particularly important with a carbon boot where the goal is to create a precise connection between the foot and the skate.
Heat molding can help improve:
- Fit and foot retention.
- Comfort during longer sessions.
- Contact between the foot and shell.
- Power transmission.
- Overall control and skating response.
Important: heat molding should be performed correctly and using the appropriate procedure for this type of carbon construction.
IMPORTANT: Check Your Size Carefully
The IQON CL10 runs small, so we strongly recommend not choosing your size based solely on your usual shoe or skate size.
Before ordering, check our specific size chart and the corresponding foot measurements carefully.
Depending on your foot length and shape, you may need to select one size larger than you normally wear.
If you are between two sizes or unsure which size to choose, contact us before ordering.
With a carbon boot, correct sizing is particularly important. The objective is to achieve a secure fit while allowing the heat-moldable shell to be properly customized to your foot.
Not sure about your size? Contact us and we'll help you choose.
Handmade Hybrid Carbon Construction
The CL10 features a handmade hybrid carbon construction.
The shell incorporates Kevlar reinforcement, while the cuff also uses a carbon structure reinforced with Kevlar.
This construction is designed to achieve an excellent balance of:
Stiffness + precision + durability + low weight.
A significant difference compared with conventional molded plastic boots.
165 mm Mounting – Build Your Own Setup
The boot features a 165 mm two-point mounting system, one of the most widely used standards for freeskate and urban skating configurations.
This allows the CL10 to be combined with a wide range of compatible frames, making it possible to build a setup according to your skating style.
Create a compact and maneuverable urban setup or configure the boot for freestyle, slalom or even downhill, depending on the frame, wheels and other components selected.
Precise Closure System
The CL10 combines several closure systems to provide secure and adjustable foot retention.
Cuff
A micro-adjustable buckle allows precise adjustment of the pressure around the upper foot and ankle.
Instep
A 10 cm micro-adjustable Crown ratchet buckle provides precise mid-foot support.
Foot
Traditional laces allow you to fine-tune pressure across the instep and forefoot.
Together, these systems provide progressive and customizable support rather than relying on a single closure mechanism.
Comfortable Built-In Liner
Although performance is the priority, the CL10 features a built-in liner with a microfiber inner lining.
The interior construction combines:
- Microfiber.
- TPU.
- Ballistic nylon.
- Built-in liner.
- Lace closure.
The result is a comfortable interior that complements the rigid carbon shell without compromising the performance-oriented character of the boot.
Designed for More Than Urban Skating
The IQON CL10 is particularly suitable for:
Urban Freeskate
For skaters looking for maximum response and control during urban skating, direction changes and technical obstacles.
Freestyle / Slalom
The rigid carbon construction provides the precision and direct response required for technical movements.
Downhill
An excellent foundation for a dedicated downhill setup when stiffness and a solid connection to the frame are priorities.
Long Distance
The heat-moldable shell allows a highly precise fit, making it possible to optimize comfort for longer skating sessions.
Technical Specifications
- Brand: IQON
- Model: CL10
- Type: Hybrid Carbon Boot
- Use: Freeskate / Urban / Freestyle / Slalom / Downhill / Long Distance
- Construction: Handmade Hybrid Carbon
- Shell: Kevlar-reinforced carbon composite
- Cuff: Carbon with Kevlar reinforcement
- Heat Moldable: Yes
- Heat Molding Temperature: 110°C
- Mounting: 165 mm / 2-point
- Sizes: Full single sizes, no half sizes
- Fit: Standard per size + heat-moldable shell
- Liner: Built-in
- Lining: Microfiber
- Upper Material: TPU + ballistic nylon + microfiber
- Top Closure: Micro-adjustable buckle
- 45° Closure: 10 cm micro-adjustable Crown ratchet buckle
- Front Closure: Laces
- Liner Closure: Laces
- Approx. Boot Height: 20 cm
- Construction: Vegan
A True Carbon Freeskate Boot
The IQON CL10 is designed for skaters who want to experience their skates in a completely different way.
Its heat-moldable carbon shell, carbon cuff, Kevlar reinforcement, 165 mm mounting system and micro-adjustable closure system create an extremely precise platform for demanding skaters.
If you're looking for a rigid, responsive and heat-moldable carbon boot that can become the foundation of a high-level urban freeskate setup, the CL10 is a serious choice.
Carbon. Precision. Direct response. The next step for your setup.
Before Ordering: Check Your Size
This boot runs small. We strongly recommend choosing your size according to our IQON CL10 size chart and actual foot measurements, rather than simply using your usual shoe or skate size.
If you're unsure between two sizes, contact us before ordering. We'll help you find the most appropriate size.
Español
